Modular Pump Options From AMN-Misting
The design protected V-belt driven AMP pump series is a modular construction solution where the same basic elements are used in “infinitely” many different combinations and with maximum focus on service and customer friendliness.
- The basic program is with a 1,200 liters pump and IE3 motor, either 2.2 or 4 kW.
 - V-belt drive, where we provide a 10-year warranty.
 - Capacity between 400 & 1,200 liters/hour with the same standard pump.
 - Simple and easy service access.
 - Minimum capacity down to 0 liter/hour, with temperature control.
 - Only quality parts used, like stainless steel, glycerin filled manometers etc.
 - All pumps tested in your specific combination before delivery.
 - When ordering basic stock items, shipment is ready for dispatch within 1 week.
 - All pumps are delivered in a strong recyclable wooden pallet box (80×60 cm)
 

In need of custom-made combination? 
We can adjust everything to your exact request, e.g.
- Different controllers
 - Bigger and smaller pumps
 - Direct driven pumps
 - Different levels of security systems
 - Start/stop by your smart phone.
 - Floor mounted bracket system instead of wall system
 
Main Type of Pumps
The Cheap and Simple Solution:
A good solution without any automatic. Nothing to complicate the functionality.
Just add a power connection to the motor from your switch board and control from your climate computer.
Included in the delivery are all necessary parts:
- Extra filter inserts
 - Bolts etc. for wall mounted bracket
 - Hose, ball valve, manometer etc. for connecting to water supply
 - Power cable with 16 Amp CEE plug
 
The Advanced Solution Integrated with Automatic and All Security Systems
Included in the delivery is all needed equipment like:
- AMP 42 controller integrated with required automatic
 - Low pressure accumulator to avoid vacuum inside pump
 - High pressure sensor will stop the pump if supply of water or pressure dissapears or if there are major leaks in the high pressure system
 - Bleed off valve to avoid dripping from nozzles (single section)
 - Temperature security system (multiple sections) capacity down to 0 l/min
 - High pressure non-return valve (multiple sections)
 - All parts to connect to water supply
 - Power cable with 16 Amp CEE plug
 
Bleed-off Valve for Separate Sections – No Drips from the Nozzles
A signal from your climate computer to this box will enable it to handle a 230 V solenoid valve, bleed-off valve and signal to the pump from multiple sections.